Goldberg RC ARF Airplane Jet
 | CMP F4U Corsair 120 - 76" Nitro Gas Radio Remote Controlled RC Plane ARF Airplane Warbird $349 The F4U Corsair is a real beauty. Anyone who likes the war birds is bound to love this airplane. The kit includes a fiberglass fuselage, and is painted with a blue and gray scheme.. The wings are sheeted foam, covered with Solortex cloth covering and painted. All control surfaces have beveled leading edges and the control horn mounts are preinstalled. The wing is complete with CA hinges. The leading edge of the wing is pre-shaped. Completely workable three-piece flaps are also built into this kit. This kit can be fitted with either fix landing gear or 90 degree rotating retracts. Note: See pictures below for actual paint scheme used. With an 4-stroke engine installed, this F4U Corsair plane will fly, feel, and sound amazing. Specs: Wingspan 75.5" Fus elage Length 52" Recommended Engine Size 2c/91, 108 4c/120 Flying Weight 11 - 11.5 lbs Wing Area 892 sq in Fuel Tank 350-450 cc Radio 5-6 Ch 6-7 Servos The kit box is nicely packed, with all the major parts well packed in a light foam wrap and clear plastic bags. All balsa wood rib wing, nicely covered, rivets decals already applied, ailerons hinged and installed. Horizontal, elevators and rudder also all wood, air foiled surfaces, hinged and ready. Drop tank included and assembled. Slots in the interior cardboard held all items tightly in place, so it will minimize damage from shipping. Included with the kit are fuel tanks, engine mounts, wheels, hardware, pushrods, clear plastic canopy and nose cone, decal sheet, one-piece fiberglass cowls, and fixed wire landing gear plus other necessary hardware. You will need to purchase some building supplies, engines, spinners, servo extensions, and a radio. This plane is retract-ready so mechanical retracts are an interesting option to consider for this plane kit. The quality of the materials is excellent with a one-piece fiberglass fuselage/fin straight and true. The instruction manual has excellent-quality step-by-step drawings. With an 4-stroke engine installed, this F4U Corsair plane will fly, feel, and sound like the legendary fighter jet from World War 2. Engine/Radio Equipments Sold Separately. Engine/Radio NOT included. As with all of our arf kit, this plane comes with all parts carefully wrapped in thin foam sheet and plastic bags. |
 | ARF F-4E Phantom 64mm EDF RC Jet (without TX, RX) $249.95 F-4E Phantom Electric Ducted Fan Radio Control Jet ALMOST-READY-TO-FLY-VERSION WITHOUT TRANSMITTER+RECEIVER Factory Flight Test F-4E Review & Flight This is the latest creation from the fertile mind of genius EDF designer Andy Chen...there IS a difference as to who designs these, this guy just has the magic touch, and it shows in the scale accuracy of the overall plane, and also in a lot of thoughtful little details and engineering that really make it stand out from the competition. It's beautiful! Small, and very high performance...Very high quality molding, lots of detail, good paint, good water transfer decals, clear canopy with cockpit deck(the pics on the nitroplanes website show an early prototype with a tinted canopy), easily removeable or replaceable landing gear, full flying stab, easy fan access for maintanance, lots of nice features. In the air, it's pure dynami te, everybody guesses it to be about 70mph, and that's very fast for such a small airplane! It's a whole level of performance above the rest of the RTF EDF jets... It's basically the smallest airframe that you can wrap around a 64mm fan. Hand launching is really easy, there is a grip molded in for doing it, and you don't need to heave it, it will fly away from just a light toss with no problems. Roll rate is tremendous, vertical performance is awesome, and downright speed, well...most EDFs, you fly around at full bore all the time, with this one, you want to save full throttle for verticals and high speed passes, and throttle back to half or two thirds to keep the thing manageable the rest of the time, it's mighty quick. It's very easy to land, I have been bellying mine in on the grass with no problems, though you might want to put a little glass cloth on the lower lip of the intakes, they tend to snag the grass and get chipped up. With the landing gear on, o ff pavement, it has no bad habits at all. The gear comes on and off with a few screws in a minute or two. It takes up no room in the car, it can fly out of small parks, or you can take it to the club field and mix it up with the big boys, it costs little, it requires no maintainance, it looks great, and it flies great. It's my new favorite airplane! Features: -State of the Art Foam -Fully Proportional Elevator, Rudder and Throttle Controls -Improved Aerodynamic with innovative Wing and Fuselage Design -Durable Fuselage and Wings Construction -Easy to learn for Beginner and Fun to Fly for Experts Wingspan: 542mm Length: 788mm Flying Weight: 540g Wing Area: 8dm^2 Wing Load: 67g/dm^2 64mm Ducted Fan Servos : 4 9G Servos Motor : 14L inner brushless motor ESC : 25A Battery : 11.1V 1300mAH LiPo Battery Radio System REQUIRED : 4-Channel TX and 6CH Rx |
 | Exceed RC F-4E Phantom ARF 64mm Electric Ducted Fan RC Jet Shark Version (without Transmitter & Receiver) $249.95 F-4E Phantom Electric Ducted Fan Radio Control Jet ALMOST-READY-TO-FLY-VERSION WITHOUT TRANSMITTER+RECEIVER Factory Flight Test F-4E Review & Flight Features: -State of the Art Foam -Fully Proportional Elevator, Rudder and Throttle Controls -Improved Aerodynamic with innovative Wing and Fuselage Design -Durable Fuselage and Wings Construction -Easy to learn for Beginner and Fun to Fly for Experts This is the latest creation from the fertile mind of genius EDF designer Andy Chen...there IS a difference as to who designs these, this guy just has the magic touch, and it shows in the scale accuracy of the overall plane, and also in a lot of thoughtful little details and engineering that really make it stand out from the competition. It's beautiful! Small, and very high performance...Very high quality molding, lots of detail, good paint, good water transfer decals, clear canopy w ith cockpit deck(the pics on the nitroplanes website show an early prototype with a tinted canopy), easily removeable or replaceable landing gear, full flying stab, easy fan access for maintanance, lots of nice features. In the air, it's pure dynamite, everybody guesses it to be about 70mph, and that's very fast for such a small airplane! It's a whole level of performance above the rest of the RTF EDF jets... It's basically the smallest airframe that you can wrap around a 64mm fan. Hand launching is really easy, there is a grip molded in for doing it, and you don't need to heave it, it will fly away from just a light toss with no problems. Roll rate is tremendous, vertical performance is awesome, and downright speed, well...most EDFs, you fly around at full bore all the time, with this one, you want to save full throttle for verticals and high speed passes, and throttle back to half or two thirds to keep the thing manageable the rest of the time, it's mighty q uick. It's very easy to land, I have been bellying mine in on the grass with no problems, though you might want to put a little glass cloth on the lower lip of the intakes, they tend to snag the grass and get chipped up. With the landing gear on, off pavement, it has no bad habits at all. The gear comes on and off with a few screws in a minute or two. It takes up no room in the car, it can fly out of small parks, or you can take it to the club field and mix it up with the big boys, it costs little, it requires no maintainance, it looks great, and it flies great. It's my new favorite airplane! Wingspan: 542mm Length: 788mm Flying Weight: 540g Wing Area: 8dm^2 Wing Load: 67g/dm^2 64mm Ducted Fan Servos : 4 9G Servos Motor : 14L inner brushless motor ESC : 25A Battery : 11.1V 1300mAH LiPo Battery Radio System REQUIRED : 4-Channel TX and 6CH Rx |
 | Exceed RC F-4E Phantom ARF 64mm EDF RC Jet (without Transmitter & Receiver) $249.95 F-4E Phantom Electric Ducted Fan Radio Control Jet ALMOST-READY-TO-FLY-VERSION WITHOUT TRANSMITTER+RECEIVER Factory Flight Test F-4E Review & Flight Features: -State of the Art Foam -Fully Proportional Elevator, Rudder and Throttle Controls -Improved Aerodynamic with innovative Wing and Fuselage Design -Durable Fuselage and Wings Construction -Easy to learn for Beginner and Fun to Fly for Experts This is the latest creation from the fertile mind of genius EDF designer Andy Chen...there IS a difference as to who designs these, this guy just has the magic touch, and it shows in the scale accuracy of the overall plane, and also in a lot of thoughtful little details and engineering that really make it stand out from the competition. It's beautiful! Small, and very high performance...Very high quality molding, lots of detail, good paint, good water transfer decals, clear canopy w ith cockpit deck(the pics on the nitroplanes website show an early prototype with a tinted canopy), easily removeable or replaceable landing gear, full flying stab, easy fan access for maintanance, lots of nice features. In the air, it's pure dynamite, everybody guesses it to be about 70mph, and that's very fast for such a small airplane! It's a whole level of performance above the rest of the RTF EDF jets... It's basically the smallest airframe that you can wrap around a 64mm fan. Hand launching is really easy, there is a grip molded in for doing it, and you don't need to heave it, it will fly away from just a light toss with no problems. Roll rate is tremendous, vertical performance is awesome, and downright speed, well...most EDFs, you fly around at full bore all the time, with this one, you want to save full throttle for verticals and high speed passes, and throttle back to half or two thirds to keep the thing manageable the rest of the time, it's mighty q uick. It's very easy to land, I have been bellying mine in on the grass with no problems, though you might want to put a little glass cloth on the lower lip of the intakes, they tend to snag the grass and get chipped up. With the landing gear on, off pavement, it has no bad habits at all. The gear comes on and off with a few screws in a minute or two. It takes up no room in the car, it can fly out of small parks, or you can take it to the club field and mix it up with the big boys, it costs little, it requires no maintainance, it looks great, and it flies great. It's my new favorite airplane! Wingspan: 542mm Length: 788mm Flying Weight: 540g Wing Area: 8dm^2 Wing Load: 67g/dm^2 64mm Ducted Fan Servos : 4 9G Servos Motor : 14L inner brushless motor ESC : 25A Battery : 11.1V 1300mAH LiPo Battery Radio System REQUIRED : 4-Channel TX and 6CH Rx |
 | Walkera 3-Channel ARF DragonFly 11 EPP R/C Jet w/ NiMH+Mixer+ESC+Much More! $179.95 F-27 ARF 3-Channel Radio Remote Control Tough EPP Jet *BRAND NEW* Advanced 3-Channel ARF R/C Jet Airplane For Experienced RC Plane User Only !!! (Assembly Required) The F27 is a delight to fly, handling is safe and predictable for beginners, yet can be fast with a high roll rate for experienced fliers. And best of all, it looks great! The F27 wings and fuselage are EPP. All the EPP parts are accurately manufactured using computer controlled cutting machines to produce a very accurate and smooth finish. Most of the difficult construction work is done for you; mounting holes are precut in the fuselage for servos, receiver and battery. This F-27 is a work of art, but such a finish is within the capability of most builders, just time and care is needed. *BRAND NEW* Advanced 3-Channel ARF R/C Jet Airplane For Experienced RC Plane User Only !!! (Assembly Required) NEW IN BOX !!! Tough Professional Grade EPP foam material construction A compact model that lets you forget all about transport problems. Naturally the roll rate and general agility of a model of this size are at an extreme level, and this means simply amazing fun for the pilot. Never the less the models flying characteristics are nicely balanced and good-natured. The Micro-Jet is supplied virtually as a one-piece model; the only separate parts are the fins and cabin, the bottom guard and the motor cover. The two servos are simply pushed into the servo wells and secured with a drop of glue. The control surfaces feature integral foam hinges. The standard power unit is a 380 Motor with 5.5 x 5¡± propeller and 8.4V 650mAh battery. This combination produces a well-balanced, fast flying model. The Micro-Jet can also be upgraded in power terms right up to brushless motors, and the extra power makes the model even more exciting to fly. Micro Jet is the second generation, most advance plane, build on the latest CAD technology. It can perform excellent flight outdoor in calm climate. Using the ultra tough EPP materials, the plane does have very strong structure. In addition, the main rotor blades are using top quality plastic materials, which is not easily break. New, powerful battery extends the flight time significantly. English manual All items are New-In-Box, require assembly, almost ready to Fly ! Wingspan: 26 in Length: 23.6 in Wing Area: 201 sq. in Weight: 15.9 oz RC Micro Jet Almost Ready To Fly (ARF) plane body 110V Quick Battery Charger 8.4V 650mAh Battery 380 Motor Require 3 CH or above radio system TX + RX (not included) Servo required (not included) Recommend upgraded to brushless motor (not included) This new range of models are outstanding - They are all made form EPP Foam which makes them very very tough, In a crash the will bounce! if they do break then you can easil y repair them with either 5 min Araldit |
 | New ARF! Red Ultimate BiPe 40 - 41.5" Nitro Gas Radio Control RC Airplane $319 This is the radio controlled, glow powered, almost ready to fly Ultimate Biplane .46 Scale RC Airplane. For Intermediate to Advanced Modeler/Flyers. Ultimate Biplane .46 ARF comes with its two wings completely assembled. No more gluing wing-spar pieces and aligning and gluing wing halves together. These wings, like the rest of the kit, are beautifully built, sanded and covered with polyester covering. The kit also comes with mounted cabane struts, a painted fiberglass cowl and molded wheel pants and hardware. New ARF! Ultimate BiPe 40 - 41.5" Nitro Gas Radio Control RC Airplane Key Features : -Top quality balsa and plywood construction -Built-up wings symmetrical airfoil -All wood constructions with fiberglass parts -Trimmed and painted cowling by fuel proof paint -Hand iron-on color covering Comes with all hardware and accessories Key Features : Top quality balsa and plywood construction Built-up wings symmetrical airfoil All wood constructions with fiberglass parts Trimmed and painted cowling by fuel proof paint Hand iron-on color covering Comes with all hardware and accessories Plane Specs: Wing span: 41.5in / 1100mm Wing area: 580 sq in / 37.5 sq dm Flying weight: 4.5lb / 2050g Fuselage length: 39.8 in / 1000 mm User Requirements: Engine Required: 2c 0.40 cu in 4c 0.52 cu in Radio Required: 4 channels,5 servos New ARF! Ultimate BiPe 40 - 41.5" Nitro Gas Radio Control RC Airplane Clean, sharp lines Extremely agile Light, and flies great on engines in the lower end of the recommended size range Complete hardware package including Spinner, fuel tank, wheels, and fuel tubing Awesome aerobatics, very capable without being ?Twitchy? Takeoffs and landings are quite manageable Rolls, Snaps, Blenders, and other spinning maneuvers look spectacular FEATURES: All Balsa and plywood constructions. CAD Laser cut ARF Kit. |
Goldberg RC ARF Airplane Jet
No comments:
Post a Comment