Cox RC Model Airplane Nitro
K&B infant Torpedo & COX .010 TD Model Airplane Engines
 | Zlin Z-50 Engine 46~52 - 56" Nitro Gas Radio Remote Controlled RC Airplane ARF $319 The Zlin Z-50 is one of the most famous sports planes used in aerobatics and this ARF NitroModel Z50 is built with all the aerodynamic characteristic of the real one! It is a very special aerobatic airplane made by quality balsa wood protected by clear coating. 90% of the model is pre-finished at the factory - you can enjoy flying this beauty with the least building time. And of course, it flies as good as it looks! Wing Span : 55.9 in / 1420mm Wing Area : 531 sq in / 34 sq dm Flying Weight : 5.5lb / 2480g Fuselage length : 43.3 in / 1100mm Engine Required : 2c : 0.46 4c: 0.52 Radio Required : 4channels 5 servos Decals included but not pre-applied. |
 | 4-CHANNEL EP-Powered AT-6 Texan RC AIRPLANE Model Kit (Unassembled) $49.95 Features: 4 Channel Remote Control Airplane Full aerobatic characteristics; inside loops, outside loops, axial rolls, inverted flight, knife edge, stall turns, hammerheads, and spins are possible Constructed with Super Tough, lightweight EPO material! Perfect appearance and emulation (Scale appearance, great attention has been given to details) True Classic Trainer of All Time! Decorative Waterslide Decals! Easy to Build & Endless Fun to Fly! Perfect Low-Wing Trainer! Rudder helps steer plane on ground on its scale landing gear for easy take off Shock Resistant Reinforced fuselage and Strong Wings Can Take Off From Ground or Hand Launched Ground Take-Off can be performed easily Huge Wing size, Excellent Flight Performance Super easy and super stable electric powered scale R/C park flyer for beginner or middle-level users Stable inverted flight Super stable for beginner, Super low speed for safety, Super low altitude for fun Fabricated by accurate molds with high fidelity of real airplane Excellent stability and aerobatic capability Detailed Body Structure High roll rate Super low speed for safety, Super low altitude for fun Crash Resistant Construction Easy to Fly, Easy to Control, Super stable for beginner Slow Speed Flying Capable, Good for Beginner Suitable for both beginners and experienced pilots Specifications: Wingspan: 900mm (35.4") Length: 680mm (26.7") Flying Weight: 480g (16.9 oz) Requirements: Drive System: 370 carbon brushed motor Servo: 3X 9g high speed micro servos ESC: 20A speed controller Battery: 9.6V 650mah Ni-MH Control system: 4 CH Multifunctional Radio Transmitter and Receiver Included: Airplane Kit Unassembled Screw Driver 4 Propellers English Manual |
 | 421 Scale RC Aircraft Twin-Engine 46 - 71" Nitro/Electric Powered Remote Control Airplane ARF $499.95 421 Twin Engine Fuel/Electric-Powered Radio Controlled RC Plane ARF Wing Span: 71in / 1800mm Wing Area: 763 sq.in / 49.5 sq.dm Flying Weight: 11.0 lbs /5000g Fuselage Length: 62.6in / 1590mm Engine Required: 2c :0.40-0.46 x2 Radio Required: 6 channels ; 10-11 servos What the Pro says (More reviews here) The quality and engineering is excellent. It goes together VERY fast, far and away the fastest twin to build I have ever done. Everything fits perfectly, and the level of prefabrication is very high. The instructions are English and decent. It comes with fixed gear, and it's set up for retracts, too. I am waiting on a set of Robart air retracts to complete my plane. Mechanical retracts could be done, with a little engineering on your part.I am using two each of Exceed Monster Power 46 outrunners, Volcano 80A Escs, and Fusion Power 3200 5s lipos. The servos are all T-Pro SG5010 standard servos. I have used a bunch of them before with no issues, they are quite a bargain. Normally, on a plane this size, which will end up at least 10 pounds, I'd use something stronger on the elevators, but this plane is set up with two elevator servos, so standard servos are just fine. I will be using a seperate UBEC on one of the batteries to power the radio. Actually, maybe two of them. On previous large twins like the B25, P82, and Mosquito, I have used 5000mah packs, but long flights of 10 minutes or so have left me landing with over half the battery still left, so this time, I went with 3200, should be plenty. The nacelles are each one large fiberglass piece. This makes access to the interior very easy. If you wanted to, it would be easy enough to cut off the cowl portions to make them seperate. What engines will fit? It is set up for two 40s, I think four strokes should go in without any real problem, too. With my electrics, I made up my own plywood box motor mounts, but nice nylon mounts and good quality fuel tanks and tubing are all included in the kit, if you want to go glow. Did I mention how nice the glasswork and paint are? Along with all the woodwork and covering? Nice quality, and LIGHT. Oh...and you can't tell from the pictures, but it includes split flaps, too. I swapped out a few pieces of hardware along the way...what is included is good quality, but I don't like using EZ connectors on flight controls, so I soldered threaded couplers onto my elevator and rudder pushrods and added clevises instead. The rest of the hardware all got used. There is a nice set of decals(stickers) included. Not sure what of them I will use, I want to make mine a little different from the box top. Anyway...so far...delighted! Many pleasant surprises with this model. More from the Pro NitroModels keeps growing and lear ning, it really |
| | Airplane RC Crystal Set for Channel 4 $19 Airplane RC Crystal Set for Channel 4 |
You can read more posts here:
Cox RC Model Airplane Nitro
No comments:
Post a Comment